Maintenance Sign-Up

 

 

We've stumbled on this post about Installing A Bathtub down the page on the internet and concluded it made perfect sense to relate it with you on this page.

Mounting a bathtub isn't precisely brain surgery, yet it does require solid plumbing, carpentry, as well as occasionally, tiling skills. Changing an old bath tub with a new one is likewise a reasonably difficult job. If the old bathtub is readily easily accessible, the project can move easily; if you have to open a wall to get rid of the old tub and position the brand-new bath tub, the task is a lot harder. In either instance, the project is within a home handyman's abilities, although you will certainly need a helper to leave the old bathtub as well as embeded in the brand-new one. Make sure you have qualified yourself for the task as well as fit trying it. As opposed to working with a contractor to take over a halfway-completed project, it is much better to think about utilizing one prior to you start. Possibilities are you might require a specialist plumber to make tube links.
This post will certainly assist you set up a brand-new tub in your shower room if you have actually currently gotten a brand-new bathtub as well as don't need to alter the plan of your previous supply of water pipes.
Your tools and material list need to consist of the following:

 

• New Tub


• Hammer


• Pipeline Wrenches


• Prybar


• Shatterproof glass


• Level


• Pliers


• Adjustable Wrench


• Putty Knife


• Screwdriver


• Cold Chisel


• Tape Measure


• Pipeline Caps


 

Getting ready for the Setup

First of all, the supporting frame supplied with the bathroom needs to be fitted (if called for) according to the maker's directions. Next, fit the faucets or mixer to the bath tub. When suitable the tap block, it is essential to make sure that if the faucet includes a plastic washer, it is fitted in between the bathroom as well as the taps. On a plastic bath, it is additionally reasonable to fit a supporting plate under the taps device to stop stress on the bathtub.
Fit the flexible faucet ports to the bottom of the two faucets making use of 2 nuts as well as olives (occasionally provided with the bathtub). Fit the plug-hole outlet by smearing mastic filler round the sink outlet opening, and then pass the electrical outlet via the hole in the bath. Use the nut provided by the producer to fit the plug-hole. Analyze the plug-hole electrical outlet for an inlet on the side for the overflow pipeline.
Next, fit completion of the versatile overflow pipe to the overflow electrical outlet. After that, screw the pipeline to the overflow face which must be fitted inside the bath. See to it you utilize all of the provided washers.
Attach the trap to the bottom of the waste outlet on the tub by winding the thread of the waste electrical outlet with silicone mastic or PTFE tape, as well as screw on the catch to the electrical outlet. Connect all-time low of the overflow tube in a similar manner.The bathroom ought to currently prepare to be fitted in its last position.

 

 

Removing Old Touches

If you need to change old taps with brand-new ones as a part of your installation, after that the first thing you ought to do is separate the water system. After doing so, turn on the faucets to drain any type of water remaining in the system. The process of getting rid of the existing taps can be rather bothersome because of the limited access that is commonly the case.
Make use of a basin wrench (crowsfoot spanner) or a faucet device to undo the nut that links the supply pipelines to the taps. Have a fabric ready for the staying water that will certainly come from the pipelines. Once the supply pipes have actually been removed, utilize the very same device to loosen up the nut that holds the faucets onto the bath/basin. You will require to quit the single taps from transforming during this process. As soon as the taps have been gotten rid of, the holes in the bath/basin will have to be cleansed of any old sealing substance.
Before proceeding to fit the brand-new faucets, compare the pipeline links on the old faucets to the new taps. If the old faucets are longer than the brand-new taps, then a shank adapter is needed for the brand-new taps to fit.

 

 

Installing the Tub

Utilizing both wood boards under its feet, place the tub in the needed placement. The wooden boards are valuable in uniformly spreading out the weight of the bathtub over the area of the boards as opposed to focusing all the weight onto four small points.
The next goal is to guarantee that the bathtub is leveled all round. This can be achieved by checking the level and also readjusting the feet on the bath tub till the level reviews degree.
To mount faucets, fit all-time low of the outermost adaptable faucet adapter to the ideal supply pipeline by making a compression sign up with; after that do the very same for the various other faucet.
Activate the water and also examine all joints as well as brand-new pipework for leaks as well as tighten them if required. Fill up the bathtub and also check the overflow electrical outlet and also the regular electrical outlet for leakages.
Lastly, repair the bath paneling as defined in the supplier's user's manual. Tiling as well as sealing around the bathtub should wait till the bath tub has been used at least when as this will settle it into its last placement.

 

 

Fitting New Taps

If the tails of the brand-new taps are plastic, after that you will need a plastic connector to stop damages to the thread. One end of the connector fits on the plastic tail of the tap and also the various other end supplies a connection to the existent supply pipelines.
If you require to fit a monobloc, then you will call for minimizing couplers, which connects the 10mm pipeline of the monobloc to the typical 15mm supply pipeline.
Next, place the faucet in the mounting hole in the bath/basin making certain that the washers are in area in between the tap and also the sink. Safeguard the tap in position with the maker offered backnut. As soon as the tap is securely in position, the supply pipes can be attached to the tails of the taps. The faucets can either be linked by using corrugated copper piping or with regular tap adapters. The previous type needs to be linked to the faucet ends first, tightening up only by hand. The supply pipelines can later be attached to the other end. Tighten up both ends with a spanner after both ends have actually been connected.

 

 

Tiling Around the Tub

In the area where the bathroom meets the floor tile, it is required to secure the joins with a silicone rubber caulking. This is important as the installation can move sufficient to crack a stiff seal, creating the water to permeate the wall surface between the bathroom and the tiling, bring about complications with moisture and also possible leakages to the ceiling below.
You can pick from a selection of coloured sealants to assimilate your fixtures as well as installations. They are sold in tubes as well as cartridges, and also are capable of securing spaces approximately a width of 3mm (1/8 inch). If you have a bigger void to fill up, you can load it with twists of soaked paper or soft rope. Remember to constantly load the bathtub with water prior to securing, to allow for the activity experienced when the bathtub is in usage. The sealer can break rather early if you do not take into consideration this activity before securing.
Conversely, ceramic coving or quadrant tiles can be utilized to border the bath or shower tray. Plastic strips of coving, which are easy to use and reduce to dimension, are also quickly readily available on the marketplace. It is advisable to fit the ceramic tiles making use of water-resistant or waterproof sticky and also cement.

 

A Step-by-Step Guide to Installing a Bathtub

 

Is your bathtub looking a bit dated lately? Believe it or not, installing a new one is a project you can do yourself. Whether your bathtub is broken or doesn’t fit in with your current bathroom’s design, you can fix it without having to hire a contractor or paying labour costs.

But, beyond saving money, there are other benefits of installing your own bathtub. When you do this project yourself, you can customise every step of the process. You can also make sure the finished product looks exactly the way you want it to.

This DIY project is quite involved, but by doing some research, preparing your bathroom and using the right equipment, it is definitely one you can take on. This guide will help you understand the technical procedures behind installing a new bathtub.

 

Remove the Existing Bathtub

 

To remove the old bathtub, you will need to turn the water supply off before you start any work. After you turn the water off, there will likely still be some water left in your plumbing system, which you can remove by turning on a faucet below the level of the bathtub. Once the water stops running, you are ready to start working.

The easiest way to remove the tub is to remove the faucet, handles and other piping and then pull the tub out from the wall. If this doesn’t work in your situation, you will need to remove part of the wall, remove the piping and then slide the tub out.

 

Choose the Right Bathtub

 

The ideal way to replace your bathtub is to find one that has the exact dimensions and has the drain and faucet on the same side as your old one. This way, it will fit in the same place and you won’t have to change the piping system in your bathroom. Choose a tub that matches your home’s decor and fits with the style of the bathroom.

 

Install the Plumbing and Ledger Board

 

You can purchase a tub drain kit at a hardware store which will have all the pieces you will need for your new tub’s plumbing. Follow the instructions that came with the kit to install the plumbing in the new tub and then take measurements to make sure the plumbing in the tub will align with the plumbing in your bathroom. If it doesn’t, now is the time to make necessary adjustments.

Some bathtubs need a ledger board that is installed on the wall behind the tub to help support it. If your new bathtub requires one, the directions that came with it will tell you how high it should be installed. If your old bathtub had a ledger board, and it is still in good condition, you can adjust its height to match the new bathtub.

 

Install the Bathtub

 

When the plumbing and ledger board are ready, you can install the new bathtub. Carefully lower it into the space, being careful not to damage the tub, wall, plumbing or ledger board. Since bathtubs are very heavy and you will need to line the tub up exactly, it is wise to have someone help you with this step.

Once the tub is in place, it needs to be perfectly level, so use a bubble level instead of estimating how level the tub is. Put the level on the top edge of the tub, not the bottom on the inside, since many tubs are designed with a sloped bottom.

If the bathtub isn’t level, adjust the ledger board and shift the tub until it is. When it is level, use screws to attach the tub to the wall studs. Most bathtubs have pre-drilled holes in the upper flange, so use these but do not over tighten the screws.

 

Hook up the Plumbing

 

Now that the bathtub is installed, it needs to be attached to your plumbing system. First, install the shoe fitting under the tub and drain pipe, then the overflow pipe and then the drain flange. Your tub plumbing kit will include specific instructions on how to install these pieces.

 

Install the Bathtub Surround

 

A bathtub surround will protect the walls around the tub from water damage and can give your new bathtub a more finished look. To install one, make sure the wall is completely clean and dry so that the adhesive will be able to hold the surround securely. Then, measure the surround and mark the same dimensions on the wall above the tub.

Following the directions that came with the surround adhesive, apply it to the wall. Press the surround against the wall on top of the adhesive and then pull it away for about three minutes to activate the adhesive, then apply the surround again. Keep in mind that this is the most common way to use an adhesive, but you should check the instructions on the package for any special steps.

If there is any excessive adhesive around the sides of the surround, you can use mineral spirits to remove it. Then use masking tape to hold the surround panels in place until the adhesive is dry. Using silicone, seal all the cracks between the surround panels and the gap between the bottom of the panels and the top of the bathtub.

If you want to install tile above your bathtub, instead of a bathtub surround, the process will be very similar. But, you will need to measure and cut tiles and install each one individually, using tile spacers to make sure they are evenly spaced. You will then use grout to fill in the spaces between the tiles.

https://www.hss.com/blog/bathroom/a-step-by-step-guide-to-installing-a-bathtub/

 

We hope you liked our post about Installing A Bathtub. Thanks a lot for taking time to browse our piece. Enjoyed reading our piece? Please share it. Help other people find it. Many thanks for your time. Come back soon.

Schedule And Pricing

Request Estimate

 

Just how do you feel in regards to Exclusive Bathroom Shower Enclosures?

Investing cash in top quality items for a washroom such as a shower unit not just enhance the charm of your bathroom, but will look equally as excellent one decade from currently. Readily available in numerous styles, shower rooms can provide your restroom a much more spacious feeling and also require little maintenance at the same time.
Living in the modern world, showers have actually ended up being much more of a deluxe compared to the ancient days in Greece where pull cable showers were taken outside and also just a cold water supply was available because of lack of plumbing. More than a welcomed modification took place in the direction of the last part of the 80's and right into the early the 90's when brand-new technologies were introduced into the bathroom remodeling industry where restroom providers saw a splurge in shower as well as bath sales, suggesting even more property owners were seeking to high end their bathrooms.
Shower rooms were popularized partially of the layout boom with shower room distributors exhibiting smooth stylish layouts. Not soon property owners were demolishing their existing bathrooms down to the bare walls, thus creating an increase in demand for house contractors and renovation companies caused by the shower room style craze. The introduction of shower units became a key point of rate of interest as it gave way to opening a restroom where the shower no more needed to be connected to the bath as well as just needed extra plumbing be mounted in order to fit the placement of the shower enclosure.
Today's remodelers are going big and going all out when it involves upgrading their restrooms given that there are even more design ideas readily available particularly for the smaller restroom. Usually the typical size of a washroom is about 130-140sq ft, according to the National Interior Design Council when the brand-new market trends entered into play, homeowners looked to bath enclosures as a way to offer restrooms a more large allure. A pivotal consider helping change the shower industry was due partially to property owners relocating towards replacing single showers with two-person showers and eliminating adjoined bath/shower devices.
The desire for home owners to share their individual design flare is mainly shared in the raised variety of sales in relation to shower rooms where individuals are looking to exceed the traditional moving glass door shower or shower specific. Because shower units have actually gone through a significant change in the past several years, individuals are swiftly finding frameless shower doors as well as enclosures are popular which taking a relaxing shower in among these sophisticated easy-to-clean shower units is a sanctuary of large enjoyment.
Staying with the trend in the direction of openness and airy spaces, the noteworthy variety of shower unit styles add a stunning attract any kind of washroom remodeling project, from frameless quadrant shower enclosures for an ultra modern look or uniquely designed frosted glass corner shower unit adorned in chrome or stainless steel. The amazing spectacle of shower room styles directly offers to the success of the restroom and also shower industry and also has typically been reported sometimes difficult for washroom distributors to maintain supply in stock, showing there is supply popular and also is on a constant upward climb. According to indoor developers with even more homes being developed, individuals are personalizing their bathrooms before completion to include the current trends in shower room décor with shower rooms blazing a trail not only as a result of their classic beauty, however are conveniently maintained and also with everybody leading way of livings that is an included perk.

 

7 UNIQUE BENEFITS OF GLASS SHOWER ENCLOSURES TO ENHANCE YOUR SHOWER EXPERIENCE

 

A bathroom is a space where we wash off the stresses of our day and unwind. Because of this, the style of your bathroom is just as important as the pure functionality of it. If you are planning on remodelling your bathroom, the choice of shower enclosure you go with plays a very important role. The shower acts as a focal point of your bathroom and can impact the style of the space as a whole. While there are a number of options for enclosures, such as shower curtains or a screen, here is why nothing can beat the timeless style of a glass shower enclosure.

 

Adds a unique style statement

 

Nothing says modern elegance like a glass shower enclosure. The variety of shower enclosure design options will help you find the perfect fit for any bathroom style. Instead of clear glass, you can choose frosted or tinted glass to add a unique look to your bath space. You can also customise the hardware, like the handles or the frame, based on the style of the rest of your bathroom. For an ultra-chic look, you can even opt for frameless glass enclosures. These enclosures are not supported by a visible framework and thus add an effortless minimalist feel to your bathroom.

 

Unmatched versatility

 

A sleek glass shower enclosure adds an instant dash of style and elegance to a bathroom of virtually any shape, size or style. Unlike a shower rod that only comes in a certain standard size and therefore, might not be suitable for your unique bathroom, enclosures can be customised based on your requirements. Even if you have a corner that is irregularly shaped, a glass shower enclosure can be built to suit it.

 

Space-effective

 

With most of us living in apartments today, intelligent utilisation of space is critical. Your bathroom needs to include a variety of features and products but at the same time, it cannot look cramped. A glass shower enclosure is the perfect solution to make your bathroom look bigger in an instant. Since it is clear, it gives the illusion of continuity in space. A shower curtain or any other type of enclosure, on the other hand, will create a break that can make your bathroom appear much smaller than it is.

 

Completely watertight

 

No one likes the feeling of stepping into a bathroom only to find the floors wet. Without an enclosure, there is almost no way to avoid the entire bathroom getting wet every time someone uses the shower. By installing a glass shower enclosure, you can ensure that the water stays contained within a single spot that can be dried quickly. Since these enclosures have watertight bases, there’s no possibility of even a single drop of water getting out. This can save you the hassle of wiping the floors of your bathroom after every shower.

 

Low Maintenance

 

With most of us leading busy lives, any stylish feature you add to your home needs to be equal parts practical. A glass shower enclosure doesn’t just add a touch of urban glamour to your bathroom, it also requires little to no upkeep. Once you install it, you can enjoy the luxury it adds without having to spare a thought about maintenance. Since the glass used for these enclosures is tempered, they are resistant to scratches or cracks. Many shower enclosures also have the option of adding a protective coating, which will help avoid soap and water stains. With this, your glass enclosure will always look as good as new!

 

Impressive safety features

 

The waterproof feature of glass shower enclosures don’t just add to the aesthetic appeal of your bathroom, they are a very important safety feature. Accidental falls due to wet floors are fairly common, particularly in homes with young children and elderly people. By keeping your bathroom completely dry, a glass enclosure can help prevent many of these accidents. The glass used in shower enclosures are also tempered to make them stronger. This stops them from shattering into sharp pieces and potentially causing a serious injury.

 

Creates a hygienic space

 

With their moist, humid environment, it’s no wonder that microbes can thrive in bathrooms. If you have a shower curtain, you might notice a film of mildew growing on the surface over time. Apart from spoiling the style of your bathroom, mildew and spores can cause several health issues. With a glass shower enclosure, all of this can be easily avoided. Unlike curtains, glass is a non-porous surface, which means that microbes cannot grow on it. Glass is also much easier to clean. Just a quick spritz of a disinfectant and a wipe and your glass enclosures will be sparkling clean again!

https://www.jaquar.com/en/blog/benefits-of-glass-shower-enclosures

 

I hope you liked our section about Shower Glass Enclosures . Thank you so much for spending some time to read through our post. Enjoyed our blog? Please share it. Help other people locate it. I cherish reading our article about Exclusive Bathroom Shower Enclosures.

Additional Information